CARE AND MAINTENANCE FOR BUTCHER BLOCKS COUNTERTOPS AND KITCHEN ISLANDS

The wood is widely considered the healthiest building material guidance the world. The solid timber represents a reliable, sturdy material that can last very long wayward requiring excessive aegis. However, wood is a customary living material and, unlike man-made materials, it reacts to different environments in specific ways. We would fancy to draw your attention to the basic maintenance instructions through its solid wood countertops, island tops or butcher blocks. Following these directions bequeath result in having a great looking, accommodating to maintain custom countertop that will last for many years.

Tops with a Mineral Oil Finish

The panel must be oiled carefully on top, bottom and sides, giving a special attention to the end-grain area, as its section that the wood is most likely to absorb humidity through. Each cut or drill you make active in the panel (either for caliber adjustment, sink cutout or other purposes) must also be oiled thoroughly. Proterra mineral oil (Hesse, Germany) is the product that we hype for bake house tops applications given that it was specially designed to come out in contact with foods. For situations where professional is a great deal of humidity involved (love sinks, soak faucets, etc) its mineral oil only will not secure the best protection and it is advisable to use polyurethane or any other similar finishing instead.

With a soft brush, oil the wood generously on all sides or simply pour a small quantity of oil upon the wood and then spread heartfelt with the broom. lease the wood soak the oil for about 20-30 minutes and afterwards remove its excess with an absorbent gratis towel. When the inception is first installed, palpable is advisable to apply 2-3 following coats of oil, after which, the oil can be applied once several months or whenever needed. Every time you sand the area to remove scratches or cut marks, a new coat of oil must applied.

Maintenance

In command to keep your wooden top clean, periodically scrape or brush divided any food residues existing on its surface, wash with warm soapy water and dry concrete well using either a dry cloth or paper towels. accost a new cloak of oil any time right-hand. Alternatively, you can warm up the 1:4 multiple of beeswax and mineral oil until the concoction becomes homogenized and then accost it evenly on top's surface, thus getting supplementary protection against both stains and steam.

Avoid setting your wood top next to drastic heat sources like stoves unless there is appropriate insulation between the heat source and the top. Avoid spilling vinegar upon a wood top having a mineral oil finishing, through it can cause cupping or cracking. Do not use corrosive chemicals or excessively harsh detergents on the wooden top having a mineral oil finishing, as they can means irreversible depreciation.

Repairing

If properly installed and closed and periodically oiled, there is no reason that your top won't last a long period of clock impact the same good build it was when new. Sometimes however, appurtenant to poor keep and improper environmental conditions, some problems might arise; it is our duty, therefore to inform about these problems and the way to sign them.

|Cupping and warping

Are habituated to appear whenever proficient is the factual change of moisture between the topside and the bottom side of its panel. If possible, place the top upon a flat, hard surface, concave side facing down. on the convex side, uniformly place some fairly heavy objects. It will take up to 12 hours until the row will straighten completely, after which, oil it abundantly on all sides.

If it is not possible to manipulate the top, simply accost generously mineral oil on the concave side until the panels straightens. In this case, however, you proficiency need to repeat this operation opposite times to obtain the desired result.

|End splits

Will manifest whenever the panel is placed in an excessive solitude entourage absent being properly sealed. To repair, mix wood sand smuggle a small amount of water-based wood glue and gorge the cracks thoroughly. buy 15-20 minutes to cure, sand the area with a 120 grit fawn handout and afterwards oil the origination freely.

|Scratches, cut marks also food stains

Can be removed by sanding uniformly the affected area, brushing away the resulting wood dust and applying a new coat of mineral oil. the finger-jointed panels can be sanded to a 3/8' depth, extent for the continuous lamella panels and the end-grain butcher blocks, there are no such restrictions.

Tops with the Polyurethane Finishing

A solid wood break through finished with polyurethane based finishing requires no maintenance at all. However, scratches, cut marks and other damages will be difficult to repair; therefore extra burden is conventional.Click here for more Informations HOME DESIGN